Share This Page

Search The Site
Our Product Range

Tel:   +44 (0) 1792 588 722
Fax:  +44 (0) 1792 582 624

MTC Series - Marine Temperature Calibrator

The MTC series of portable temperature calibrators makes it very easy to maintain correct readings for all your temperature monitoring devices. The dry-block design does not use any hazardous hot liquid, has a larger temperature range and heats up and cools down much faster than a traditional liquid bath.

The MTC Series is DNV Approved for use in the Marine Industry.

The MTC dry-block calibrators have been designed for much easier true temperature calibration in the field, leading to reliable results. The simple operation and the automatic functions have been carefully selected for ease of use. This has resulted in a fast, simple and efficient temperature calibrator without compromising quality. Reach 320°C (608°F) in just 4 minutes*.

The MTC Series also utilises MVI circuitry that has been adopted from the original ATC series, which ensures stable temperatures even when the mains supply is unstable.

The MTC series features a large backlit display showing a lot of useful information simultaneously: The set value and the true temperature, the status on the thermo switch test input, a count-down time before the temperature is stable and a big check mark when it is stable. To save time use the automatic switch test. The MTC series will find the open and close temperatures on a thermo switch and calculate the dead band. The MTC series also features an auto-step function. Using this function you may stay in the control room and monitor the temperature reading while the calibrator automatically steps through a number of pre-programmed temperatures located next to the sensor.

Models and temperature ranges 
MTC-140 A: -17 to 140°C (-1 to 284°F) 
MTC-320 A: 50 to 320°C (122 to 608°F) 
MTC-650 A: 50 to 650°C (122 to 1202°F)

Features for MTC

  • Interchangeable inserts
  • Multi-hole insertion tubes
  • MVI Mains Variance Immunity
  • Automatic switch test
  • Multi information display
  • Safty banana bushings
  • Auto stepping
  • Stability indicator
  • Count down timer (shows when unit is stable)
  • Programmable maximum temperature
  • Fast simulation/training mode
  • Re-calibration from keyboard
  • RS232 and JOFRACAL calibration software

One of the world’s leading manufacturers
and developers of calibration instruments for
temperature, pressure and process signals