Pressure Calibration Module – Multical

The Multical Pressure Module can turn a Digital Multimeter into a Pressure Calibrator. If you can measure DC or mV, then you can measure pressure with a Multical.

The Multical converts the pressure measurement to mV and the output is displayed on the meter.

Features

Accuracy: up to 0.05% of reading
Rugged - Liquid & gas compatible 316 SS diaphragm sensor
Pocket-sized
Standard banana jack outputs compatible with most high accuracy meters.
Runs on single 9V battery for more than 400 hrs.
Supplied complete with UKAS Certificate, protective leather holster and cord set
with 9V battery installed.
Pressure indication in up to 9 engineering units when used with Haven’s
Spec-Cal™ Eclipse II Process Calibrator

MODEL

RANGES

ACCURACY

A
H20/PSI

0 to 830 "H20:	± (0.05% of reading +0.1 "H20)
0 to 30 psi:	± (0.05% of reading + 0.01 psi)
30 to 50 psi:	± (0.25 % of reading)
0 to -14.7 psi:	± (0.5% of reading +0.02 psi)
Max Pressure:	100 PSI

B
inHg/PSI

0 to 30 "Hg:	± (0.1% of reading + 0.01"Hg)
0 to -30 "Hg:	± (0.1% of reading + 0.01 "Hg)
0 to 500 psi:	± (0.1% of reading + 0.02 psi)
0 to -14.7 psi:	± (0.25% of reading)
Max Pressure:	1000 psi

Enclosure

Weight: 85g
Dims: 6½ x 11 cms
4 mm banana plugs

Pressure Connections

2 x 1/8" NPT Female (A+B)
1 x 1/8" NPT Female (C)