php hit counter
 
Portable Calibrators
Multifunctional
Electrical
Services
Calibration & Repair

Home > Temperature Calibrators > Oil/Water Baths

Oil/Water Baths – OTB-8 Series

 

Haven OTB-8 Oil/Water Baths are a compact and reliable solution for the calibration of thermal sensors. Available in 2 models depending on range and application required.


 

All baths are supplied complete with bath cover, drain tap, carry handles and hole to hold a certified sensor. The bath is fully insulated on the sides and the base and has a cooling coil fitted for connection to a cold water supply for use around ambient.

  • Temperature stability as good as ±0.005°C
  • Ranges covering -35°C* to 250°C
  • 7 Litre or optional 12 litre capacity bath.

* A flow cooler is required to operate OTB-8S model at below ambient temperatures.


OTB-8HT models can operate to +10°C with a CH-5 Chiller Unit.


OTBSoft
has been designed for use with OTB-8 Oil/Water Baths and the TU-20D controller on the refrigerated baths. It is a windows based programme that connects via an RS232 connection to your computer. Programmes can be created, saved and recalled at any time as well as running in real time mode. Time, temperature and ramp rates can all be set up. Temperature can be set to two decimal places.
Temperatures within the range of -35°C to 250°C can be programmed.

NB: The minimum temperature of an OTB-8HT is Ambient +10°C or +10°C with the CH-5 Chiller.

  OTB-8S OTB-8HT
Temperature Range °C Ambient +10 to 200 Ambient +5 to 250
Temperature Selection Digital Digital
Temperature Stability °C
(using water @ 40°C)
±0.005% ±0.005%
Pump Capacity litres/minute 10 N/A Internal Circulation only
Pump Capacity (mbar) 145 N/A
Method of Control PID PID
Temperature Sensor PRT PRT
Adjustable over-temperature cut-out YES YES Plus audible alarm
Low liquid level cut-out YES YES
PC Interface YES RS232 YES RS232
OTBSOFT Software Optional Accessory Standard
Bath Capacity 7 Litre 7 Litre
Bath Opening (mm) 140 x 140 140 x 140
Below Ambient Temperatures Use Flow Cooler
-20°C FC-200
-35°C FC-500
Use CH-5 Chiller
Min temperature of +10°C
Dimensions: (mm)
Bath L x W x H
Head L x W x H
351 x 260 x 183
237 x 124 x 260
351 x 260 x 183
237 x 124 x 260